Misplaced Pages

Boa knot

Article snapshot taken from[REDACTED] with creative commons attribution-sharealike license. Give it a read and then ask your questions in the chat. We can research this topic together.
Binding knot
This article includes a list of general references, but it lacks sufficient corresponding inline citations. Please help to improve this article by introducing more precise citations. (March 2013) (Learn how and when to remove this message)
Boa knot
CategoryBinding
OriginPeter Collingwood in 1996
Relatedstrangle knot, double constrictor knot
Typical useBest used for securing objects in cylindrical loads

The boa knot is a modern binding knot invented by weaver Peter Collingwood in 1996. His intention was to develop a knot that would hold well when the constricted object was cut close to the winds of the knot.

The boa knot is related to the strangle knot and the double constrictor knot. It combines both the structure and qualities of these other two knots. The boa knot can be very difficult to untie and is inappropriate when frequent or fast untying is needed. The knotted part needs to lie over a convex surface to hold.

The boa knot is best used for securing objects in cylindrical loads. Said knot is hard to move around.

Tying

  • Start with making a loop counter-clockwise Start with making a loop counter-clockwise
  • Place another loop in the same direction over the first loop Place another loop in the same direction over the first loop
  • Twist these loops, by turning the right side in clockwise direccion, so you get a figure-eight Twist these loops, by turning the right side in clockwise direccion, so you get a figure-eight
  • Take a cylindrical object and place it from under above in the first loops Take a cylindrical object and place it from under above in the first loops
  • Then put the object through the other loops Then put the object through the other loops
  • Pull the loose ends away from it, carefully shaping the knot. Make sure that the strands lined up as at the start. So they shouldn't slip out. Pull the loose ends away from it, carefully shaping the knot. Make sure that the strands lined up as at the start. So they shouldn't slip out.
  • This should tighten the loops to the point where they cling firmly to the desired object, yielding the boa knot. (Frontside) This should tighten the loops to the point where they cling firmly to the desired object, yielding the boa knot. (Frontside)
  • Boa-knot. (Backside) Boa-knot. (Backside)

Alternative

Strangle knot
Double constrictor knot

See also

References

  1. Handbook of Knots by Des Pawson — ISBN 1-4053-0467-7
  2. Knots — Andrew Adamides — ISBN 978-0-572-03329-3
  3. The Complete Guide to Knots and Knot Tying — Geoffrey Budworth — p.164ISBN 0-7548-0422-4
  4. Knotting Matters — issue 55 — p19

External links

Knots
By type
Bends
Binding
Climbing
Coils &
shanks
Decorative
Fishing 
(angling)
Hitches
Loop
Running
(slip)
Splices &
splicing
Stopper
Whipping
  • Lists of knots
  • Related topics
Lists of knots
Related topics
Categories:
Boa knot Add topic