Germanium-tin is an alloy of the elements germanium and tin, both located in group 14 of the periodic table. It is only thermodynamically stable under a small composition range. Despite this limitation, it has useful properties for band gap and strain engineering of silicon-integrated optoelectronic and microelectronic semiconductor devices.
Synthesis
Germanium-tin alloys must be kinetically stabilized in order to prevent decomposition. Therefore, low temperature molecular beam epitaxy or chemical vapor deposition techniques are typically used for their synthesis.
Microelectronic applications
Germanium-tin alloys have higher carrier mobilities than either silicon or germanium. Therefore, it has been proposed that they can be used as a channel material in high speed metal-oxide-semiconductor field effect transistors. In addition, the alloys' larger lattice constant relative to germanium makes it possible to use them as stressors to enhance the carrier mobility of germanium channel transistors.
Optoelectronic applications
At a Sn content beyond approximately 9%, germanium-tin alloys become direct gap semiconductors having efficient light emission suitable for the fabrication of lasers. Since the constituent elements are chemically compatible with silicon, it is possible to integrate such lasers directly onto silicon microelectronic devices, enabling on-chip optical communication. This is still an active research area, but germanium-tin lasers operating at low temperatures have already been demonstrated. In addition, germanium-tin light emitting diodes operating at room temperature have also been reported.
References
- ^ Wirths, S.; Buca, D.; Mantl, S. (2016). "Si–Ge–Sn alloys: From growth to applications". Progress in Crystal Growth and Characterization of Materials. 62 (1). Elsevier BV: 1–39. doi:10.1016/j.pcrysgrow.2015.11.001. ISSN 0960-8974.
- Kouvetakis, J.; Menendez, J.; Chizmeshya, A.V.G. (2006). "Tin-Based Group IV Semiconductors: New Platforms for Opto- and Microelectronics on Silicon". Annual Review of Materials Research. 36 (1). Annual Reviews: 497–554. Bibcode:2006AnRMS..36..497K. doi:10.1146/annurev.matsci.36.090804.095159. ISSN 1531-7331.
- ^ Loo, R.; Vincent, B.; Gencarelli, F.; Merckling, C.; Kumar, A.; et al. (2012-12-07). "Ge1−xSnx Materials: Challenges and Applications". ECS Journal of Solid State Science and Technology. 2 (1). The Electrochemical Society: N35 – N40. doi:10.1149/2.039301jss. ISSN 2162-8769.
- Vincent, B.; Shimura, Y.; Takeuchi, S.; Nishimura, T.; Eneman, G.; et al. (2011). "Characterization of GeSn materials for future Ge pMOSFETs source/drain stressors". Microelectronic Engineering. 88 (4). Elsevier BV: 342–346. doi:10.1016/j.mee.2010.10.025. ISSN 0167-9317.
- Gallagher, J. D.; Senaratne, C. L.; Kouvetakis, J.; Menéndez, J. (2014-10-06). "Compositional dependence of the bowing parameter for the direct and indirect band gaps in Ge1−ySny alloys". Applied Physics Letters. 105 (14). AIP Publishing: 142102. doi:10.1063/1.4897272. hdl:2286/R.I.27074. ISSN 0003-6951.
- "Scientists construct the first germanium-tin semiconductor laser for silicon chips". Phys.org. 2015-01-20. Retrieved 2019-12-12.
- Prachi Patel (2015-01-22). "The Germanium-Tin Laser: Answer to the On-Chip Data Bottleneck?". IEEE Spectrum. Retrieved 2019-12-12.
- Gallagher, J. D.; Senaratne, C. L.; Sims, P.; Aoki, T.; Menéndez, J.; Kouvetakis, J. (2015-03-02). "Electroluminescence from GeSn heterostructure pin diodes at the indirect to direct transition". Applied Physics Letters. 106 (9). AIP Publishing: 091103. Bibcode:2015ApPhL.106i1103G. doi:10.1063/1.4913688. hdl:2286/R.I.29217. ISSN 0003-6951.
- Senaratne, C. L.; Wallace, P. M.; Gallagher, J. D.; Sims, P. E.; Kouvetakis, J.; Menéndez, J. (2016-07-14). "Direct gap Ge1−ySny alloys: Fabrication and design of mid-IR photodiodes". Journal of Applied Physics. 120 (2). AIP Publishing: 025701. doi:10.1063/1.4956439. hdl:2286/R.I.45246. ISSN 0021-8979.