 | This article does not cite any sources. Please help improve this article by adding citations to reliable sources. Unsourced material may be challenged and removed. Find sources: "Plane wave tube" – news · newspapers · books · scholar · JSTOR (June 2019) (Learn how and when to remove this message) |
An acoustic duct or plane wave tube is a test facility used in acoustics. Anechoic chambers are typically subject to a low frequency limit, governed by the length of the sound absorbing wedges employed to prevent reflections within the chamber. Test and measurement microphone calibration services are often required to be undertaken at frequencies where anechoic chambers cannot be used effectively. In this case, a plane wave acoustic duct with anechoic termination provides a practical alternative.
Such a facility consists of a long duct, with a special low-frequency sound source (subwoofer) at one end and very large acoustically absorbent wedges at the other end. The duct cross section dimensions are made sufficiently small compared to the wavelength at the frequencies of interest that sound can be assumed to propagate down the duct as a plane wave with no reflections from the sides. Acoustic ducts are most commonly used by National Measurement Institutes that specialise in acoustical measurement (such as the National Physical Laboratory (United Kingdom)), who use them for measurement microphone calibration at low frequencies.
 | This sound technology article is a stub. You can help Misplaced Pages by expanding it. |