Revision as of 03:17, 20 April 2019 editNeedsGlasses (talk | contribs)Extended confirmed users2,271 edits added australian aerospace engineer category← Previous edit | Latest revision as of 22:08, 20 August 2024 edit undoReviewer1830 (talk | contribs)Extended confirmed users7,539 editsm Added Tree List | ||
(20 intermediate revisions by 13 users not shown) | |||
Line 1: | Line 1: | ||
{{short description|Australian aviation pioneer}} | |||
{{Redirect|Wackett|the trainer aircraft|CAC Wackett}} | {{Redirect|Wackett|the trainer aircraft|CAC Wackett}} | ||
{{Use dmy dates|date= |
{{Use dmy dates|date=October 2020}} | ||
{{Use Australian English|date=January 2012}} | {{Use Australian English|date=January 2012}} | ||
{{Infobox military person | {{Infobox military person | ||
Line 17: | Line 18: | ||
|unit= | |unit= | ||
|commands= RAAF Experimental Section (1924–30)<br/>] (1919) | |commands= RAAF Experimental Section (1924–30)<br/>] (1919) | ||
|battles= |
|battles= | ||
{{tree list}} | |||
⚫ | * ] | ||
* ] | * ] | ||
⚫ | ** ] | ||
⚫ | ] | ||
** ] | |||
⚫ | * ] | ||
{{tree list/end}} | |||
|awards= ]<br/>]<br/>]<br/>] | |awards= ]<br/>]<br/>]<br/>] | ||
|relations= Air Vice Marshal ] (brother) | |relations= Air Vice Marshal ] (brother) | ||
Line 30: | Line 34: | ||
==Early years, war service and education== | ==Early years, war service and education== | ||
Wackett was born in ], Queensland, on 2 January 1896.<ref> retrieved 2007-08-16.</ref> He joined the ] and graduated from the ],<ref name="Odgers"/> then with the rank of ] joined ] of the ] (AFC) which had formed at ] the day before his 20th birthday. He was one of twelve pilots that went to Egypt with the Squadron to operate in support of the ], embarking on 16 March 1916 and arriving at ] four weeks later.<ref name="Randwick"/><ref name="Isaacs"/> | Wackett was born in ], Queensland, on 2 January 1896.<ref> retrieved 2007-08-16.</ref> He joined the ] and graduated from the ],<ref name="Odgers"/> then with the rank of ] joined ] of the ] (AFC) which had formed at ] the day before his 20th birthday. He was one of twelve pilots that went to Egypt with the Squadron to operate in support of the ], embarking on 16 March 1916 and arriving at ] four weeks later.<ref name="Randwick"/><ref name="Isaacs"/> | ||
], Egypt, circa. May 1917 (far right) |
], Egypt, circa. May 1917 (far right)}}]] | ||
In Egypt he designed a mounting to attach a ] to the upper wing of his ]; considerably improving the fighting ability of a type that was described by ] (who served with Wackett in No. 1 Squadron.) as the "poorest of all offensive, or defensive aircraft".<ref name="Isaacs"/> The BE2c was normally armed with a machine gun at the ] position, but the observer sat in front of the pilot and behind the engine, and between the upper and lower wings. This meant that the machine gun could only be fired in fairly narrow arcs if the Observer was to avoid hitting his own aircraft. Wackett's modification meant that all he had to do was point the whole aircraft at his adversary and that he had a measure of protection when on a bombing mission (because the BE2c could carry bombs or an Observer, but not both). | In Egypt he designed a mounting to attach a ] to the upper wing of his ]; considerably improving the fighting ability of a type that was described by ] (who served with Wackett in No. 1 Squadron.) as the "poorest of all offensive, or defensive aircraft".<ref name="Isaacs"/> The BE2c was normally armed with a machine gun at the ] position, but the observer sat in front of the pilot and behind the engine, and between the upper and lower wings. This meant that the machine gun could only be fired in fairly narrow arcs if the Observer was to avoid hitting his own aircraft. Wackett's modification meant that all he had to do was point the whole aircraft at his adversary and that he had a measure of protection when on a bombing mission (because the BE2c could carry bombs or an Observer, but not both). | ||
Wackett used his modified BE2c to good effect on several occasions. He once gave the enemy pause when while on a ] mission he was attacked by two ]s. Wackett flew towards them firing the gun and the Rumplers broke off the fight.<ref> retrieved 2007-08-17.</ref> On 11 November 1916 he was in his BE2c on a 7-hour bombing mission to ] with four other BE2s and a ] when the formation came under attack by two much superior German aircraft. Wackett was able to use his aircraft to assist the Martinsyde in defending their comrades and fighting off the attack.<ref name="Isaacs">''Military Aircraft of Australia 1909–1918''.</ref> On the night of the 14/15 January 1917, 16 Jewish workers (mostly masons, carpenters and plumbers) who had been working in Beer Sheba under the Turkish Military Authority, were sleeping in a railway carriage at Beer Sheba Railway Station when a RAF BC2c dropped a 45 |
Wackett used his modified BE2c to good effect on several occasions. He once gave the enemy pause when while on a ] mission he was attacked by two ]s. Wackett flew towards them firing the gun and the Rumplers broke off the fight.<ref> retrieved 2007-08-17.</ref> On 11 November 1916 he was in his BE2c on a 7-hour bombing mission to ] with four other BE2s and a ] when the formation came under attack by two much superior German aircraft. Wackett was able to use his aircraft to assist the Martinsyde in defending their comrades and fighting off the attack.<ref name="Isaacs">''Military Aircraft of Australia 1909–1918''.</ref> On the night of the 14/15 January 1917, 16 Jewish workers (mostly masons, carpenters and plumbers) who had been working in Beer Sheba under the Turkish Military Authority, were sleeping in a railway carriage at Beer Sheba Railway Station when a RAF BC2c dropped a 45 kg bomb very near the carriage killing all of them. Later investigations by British and Australian air-force historians confirmed that the pilot was an Australian. Further investigation and in-depth study of British, Australian and Turkish records by researcher Dr. Ilan Gal Peer, confirmed that the most likely pilot was Wackett of Number 1 Squadron attached to EEF, who believed a non-existent ammunitions shed was located in the immediate vicinity.<ref name="Sattler">''Centenary of Deaths of 16 Jewish Civilian Workers in Beer Sheva Station'', HaRakevet, Issue 119, p. 23.</ref> | ||
Wackett later transferred to ] in France and played a significant role in the ] fought on 4 July 1918. Captured German documents revealed that they had been experimenting with dropping ammunition from aircraft and No. 3 Squadron was asked to investigate doing the same. Wackett was asked to do the work as his reputation had spread; 'he had a gift for mechanical inventions' according to his superiors.<ref name="Isaacs"/> Now a ], he devised a small parachute that could be used to drop supplies to troops, designed a modified bomb rack to hold the supplies and then trained No. 3 Squadron personnel in the required technique. ] battle plan for Hamel involved resupplying the engaged machine-gunners with ammunition dropped by aircraft. In the event No. 3 Squadron was assigned other tasks during the battle and the ammunition dropping was performed by ]. Monash later wrote, "at least 100,000 rounds of ammunition were during the battle with obvious economy in lives and wounds. The method thus initiated became general in later months".<ref name="Odgers">''The Royal Australian Air Force: An Illustrated History'' |
Wackett later transferred to ] in France and played a significant role in the ] fought on 4 July 1918. Captured German documents revealed that they had been experimenting with dropping ammunition from aircraft and No. 3 Squadron was asked to investigate doing the same. Wackett was asked to do the work as his reputation had spread; 'he had a gift for mechanical inventions' according to his superiors.<ref name="Isaacs"/> Now a ], he devised a small parachute that could be used to drop supplies to troops, designed a modified bomb rack to hold the supplies and then trained No. 3 Squadron personnel in the required technique. ] battle plan for Hamel involved resupplying the engaged machine-gunners with ammunition dropped by aircraft. In the event No. 3 Squadron was assigned other tasks during the battle and the ammunition dropping was performed by ]. Monash later wrote, "at least 100,000 rounds of ammunition were during the battle with obvious economy in lives and wounds. The method thus initiated became general in later months".<ref name="Odgers">''The Royal Australian Air Force: An Illustrated History'' p. 41.</ref><ref>''The A.I.F. In France'' p270.</ref> Later that year, on 25 September, Wackett undertook a daring reconnaissance mission in 3 Squadron's first ], when he penetrated six miles (10 km) behind enemy lines to take aerial photographs of the German ]-] line, that were needed for a forthcoming attack.<ref name="Isaacs"/> Two days later he carried out an ammunition resupply flight to some isolated troops using the equipment he had designed. As a result of these two actions he was awarded the ].<ref> retrieved 2007-08-22.</ref> By the end of the war two months later he had been promoted to the rank of ]. On 6 January 1919 he was appointed the Commanding Officer of ] AFC based at ] in England. 7 Sqn. had acted as the training unit for No. 3 Squadron during the recent conflict and Wackett remained the CO until the Squadron was disbanded in March that year, at which time he returned to Australia. | ||
] | ] | ||
Post-war, Wackett was one of just 21 officers who formed the nucleus of the new ] (RAAF) in 1921. He had a strong belief in the need to develop an indigenous aircraft industry and completed a ] degree at the ], then had two years of advanced training in aircraft design under ], designer of the F.2 Fighter aircraft that he had flown while serving with No. 3 Squadron AFC. He entered and won second prize in the '''1924 Low-Powered Aeroplane Competition''' (held at ] in December that year) with his first design, the '''Warbler'''. This was a ] ] powered by an engine also of his own design, the '''Wizard''', a two-cylinder ] ] ] developing {{convert|25|hp|abbr=on}}.<ref> retrieved 2007-08-16.</ref> | Post-war, Wackett was one of just 21 officers who formed the nucleus of the new ] (RAAF) in 1921. He had a strong belief in the need to develop an indigenous aircraft industry and completed a ] degree at the ], then had two years of advanced training in aircraft design under ], designer of the F.2 Fighter aircraft that he had flown while serving with No. 3 Squadron AFC. He entered and won second prize in the '''1924 Low-Powered Aeroplane Competition''' (held at ] in December that year) with his first design, the '''Warbler'''. This was a ] ] powered by an engine also of his own design, the '''Wizard''', a two-cylinder ] ] ] developing {{convert|25|hp|abbr=on}}.<ref> retrieved 2007-08-16.</ref> | ||
Line 43: | Line 50: | ||
Wackett learned of war surplus machine tools slated for disposal from a workshop in ], ], and prevailed upon his superiors to acquire the workshop. The RAAF Experimental Aircraft Section was thus established in January 1924 and Wackett, by then a ], was placed in charge. He tried to obtain permission to design and build an entirely Australian aircraft, but the RAAF had no money in its budget for this and would not give the go-ahead unless Wackett could obtain funds from some other source. Wackett then approached the Controller of Civil Aviation ] H. C. Brinsmead and managed to persuade the Civil Aviation Branch (of the ], there not being a separate Department of Civil Aviation at this time) to fund the construction of a small ]. | Wackett learned of war surplus machine tools slated for disposal from a workshop in ], ], and prevailed upon his superiors to acquire the workshop. The RAAF Experimental Aircraft Section was thus established in January 1924 and Wackett, by then a ], was placed in charge. He tried to obtain permission to design and build an entirely Australian aircraft, but the RAAF had no money in its budget for this and would not give the go-ahead unless Wackett could obtain funds from some other source. Wackett then approached the Controller of Civil Aviation ] H. C. Brinsmead and managed to persuade the Civil Aviation Branch (of the ], there not being a separate Department of Civil Aviation at this time) to fund the construction of a small ]. | ||
The result was the ], a wooden hull ] flying boat powered by an ] of {{convert|230|hp|abbr=on}} located below and forward of the upper wing. This aircraft, the first flying boat to be wholly designed and constructed in Australia, was registered to the Civil Aviation Branch out of the Australian sequence (i.e. G-AUxx) as G-AEKB, after ], Minister for Defence. The aircraft was launched on 7 July 1925 into ]. The following day it hit a sandbank during taxi tests and later overturned whilst attempting a takeoff. Wackett was on board with Brinsmead and two mechanics; all were unhurt. The aircraft was repaired and made its first flight on 3 December that year. Wackett subsequently installed a more powerful {{convert|300|hp|abbr=on}} ] engine and an ], converting it into an ]. Following the modifications the Widgeon I was transferred to the RAAF and used at Point Cook for flying boat training from 1927. The aircraft operated with the RAAF until 1929, when it was scrapped. A larger amphibian, the Widgeon II, powered by a {{convert|440|hp|abbr=on}} ] engine, was the next aircraft to emerge from the Experimental Section workshop. Wackett himself flew the Widgeon II extensively, later saying, "I proved its capability by flying it on a {{convert|9000|mi|km| |
The result was the ], a wooden hull ] flying boat powered by an ] of {{convert|230|hp|abbr=on}} located below and forward of the upper wing. This aircraft, the first flying boat to be wholly designed and constructed in Australia, was registered to the Civil Aviation Branch out of the Australian sequence (i.e. G-AUxx) as G-AEKB, after ], Minister for Defence. The aircraft was launched on 7 July 1925 into ]. The following day it hit a sandbank during taxi tests and later overturned whilst attempting a takeoff. Wackett was on board with Brinsmead and two mechanics; all were unhurt. The aircraft was repaired and made its first flight on 3 December that year. Wackett subsequently installed a more powerful {{convert|300|hp|abbr=on}} ] engine and an ], converting it into an ]. Following the modifications the Widgeon I was transferred to the RAAF and used at Point Cook for flying boat training from 1927. The aircraft operated with the RAAF until 1929, when it was scrapped. A larger amphibian, the Widgeon II, powered by a {{convert|440|hp|abbr=on}} ] engine, was the next aircraft to emerge from the Experimental Section workshop. Wackett himself flew the Widgeon II extensively, later saying, "I proved its capability by flying it on a {{convert|9000|mi|km|adj=on}} journey across and around part of the Australian continent in 1928".<ref>Quoted on page retrieved on 2007-08-17.</ref> The next aircraft developed at Randwick was the two-seat ] of 1929, a biplane ] of conventional design, powered by a {{convert|180|hp|abbr=on}} ] radial engine. This was followed in 1930 by the improved Warrigal II, powered by a {{convert|450|hp|abbr=on}} ] radial engine.<ref>Meggs, pp. 294–301</ref> | ||
On 21 March 1927, Wackett was elected the inaugural chairman of the NSW Division of the Institution of Aeronautical Engineers (IoAE) in Sydney. The following year, after the amalgamation of the ] (RAeS) and the IoAE parent body in Britain, he was appointed the inaugural deputy chairman of the Australasian Branch of the RAeS.<ref> retrieved 2077-08-24.</ref> He also found time to act as the New South Wales RAAF ] to the ], although the duties were not onerous.<ref>Helson, Peter (2006). ''Ten Years at the Top''; an {{webarchive|url=https://web.archive.org/web/20080229193354/http://www.library.unsw.edu.au/~thesis/adt-ADFA/uploads/approved/adt-ADFA20061205.162428/public/02whole.pdf |date=29 February 2008 }}. Australian Defence Force Academy campus of the University of New South Wales, submitted as a postgraduate thesis. There is a footnote on p24 referring to Wackett's own autobiography ''Aircraft Pioneer'' and mentioning his serving as NSW RAAF ADC. Retrieved on 2007-08-17.</ref> | On 21 March 1927, Wackett was elected the inaugural chairman of the NSW Division of the Institution of Aeronautical Engineers (IoAE) in Sydney. The following year, after the amalgamation of the ] (RAeS) and the IoAE parent body in Britain, he was appointed the inaugural deputy chairman of the Australasian Branch of the RAeS.<ref> retrieved 2077-08-24.</ref> He also found time to act as the New South Wales RAAF ] to the ], although the duties were not onerous.<ref>Helson, Peter (2006). ''Ten Years at the Top''; an {{webarchive|url=https://web.archive.org/web/20080229193354/http://www.library.unsw.edu.au/~thesis/adt-ADFA/uploads/approved/adt-ADFA20061205.162428/public/02whole.pdf |date=29 February 2008 }}. Australian Defence Force Academy campus of the University of New South Wales, submitted as a postgraduate thesis. There is a footnote on p24 referring to Wackett's own autobiography ''Aircraft Pioneer'' and mentioning his serving as NSW RAAF ADC. Retrieved on 2007-08-17.</ref> | ||
==Wackett in the 1930s== | ==Wackett in the 1930s== | ||
As a result of a government-sponsored report and pressure from British manufacturers, who saw Wackett as a threat to their monopoly on Australian orders, the Randwick Station was closed in 1931.<ref name="Tech">''Technology in Australia 1788–1988'' |
As a result of a government-sponsored report and pressure from British manufacturers, who saw Wackett as a threat to their monopoly on Australian orders, the Randwick Station was closed in 1931.<ref name="Tech">''Technology in Australia 1788–1988'' p. 498.</ref><ref name="Randwick"> {{webarchive|url=https://web.archive.org/web/20070926212308/http://www.randwick.nsw.gov.au/default.php?id=155 |date=26 September 2007 }} web page about Wackett, retrieved 2007-08-16.</ref> Wackett resigned from the RAAF with the rank of ] and transferred (with some personnel and equipment) to the ] Naval Dockyard. Here he was involved in the design of ] as well as aircraft.<ref name="Cockatoo"/> He continued working for the RAAF – a single ] was built at the Dockyard under his supervision and entered RAAF service in 1933.<ref>''Tiger Moth, CT-4, Wackett & Winjeel in Australian Service'' p38.</ref><ref> retrieved 2007-08-16.</ref> He also undertook civilian aviation projects including repair and modification projects, and built the ], a six passenger airliner powered by two ] engines of {{convert|160|hp|abbr=on}}, for ] ]. A later design for a larger aircraft, the 4-engined '''Corella''', did not leave the drawing board, nor did his other aircraft concepts; VH-URP, the solitary Codock, was the only Wackett aircraft design built at the Dockyard. His marine designs at the Dockyard included small ]s such as the ''Cettien'' (which won the ] in 1934 and 1935)<ref> retrieved 2007-08-17.</ref> and the racing ] ''Century Tire II'', and larger commercial passenger-carrying vessels as well.<ref name="Cockatoo">. Retrieved 2007-08-16.</ref> | ||
In 1934, Wackett and some of his staff joined ] at ]. The following year, following a series of accidents involving Australian-operated ]s, he and his brother ] (who was then the Director of RAAF Technical Services) were asked to provide their views and recommendations to a special conference convened by the Civil Aviation Branch, held to examine the type and its shortcomings.<ref>''Air Crash Vol. I'' pp. 79–80 & ''Air Crash Vol. II'' p. 110.</ref> In 1936 he was seconded to an aviation syndicate to lead a technical mission to ] (including future enemy nation ]) and the United States to evaluate modern aircraft types and select a type suitable to Australia's defence needs and within Australia's capabilities to build. The three-man mission lasted five months and on its return advised that the ] was the most suitable type. | |||
Wackett was able to acquire the rights for the NA-32 and NA-33 versions of the aircraft, plus the 600-hp Pratt & Whitney R-1340-S1H1G engine.<ref name="dh">{{cite book |last1=Hagedorn |first1=Dan |title=North American's T-6: a definitive history of the world's most famous trainer |date=2009 |publisher=Specialty Press |location=North Branch, MN |isbn=9781580071246 |page=53}}</ref> On completion of the mission Wackett returned to Tugan Aircraft, where the Codock design was developed into the ] six/seven passenger airliner powered by two ] engines. This was the first of Wackett's designs to enter series production. The first aircraft was delivered in late 1935 and a total of eight Gannets were built for civilian customers and the RAAF. The RAAF took delivery of one new Gannet and subsequently operated another five second-hand examples. One RAAF aircraft was temporarily modified with ] engines as the LJW7A during ]. | |||
Shortly after the establishment of the ] (CAC), Tugan Aircraft was purchased to give CAC a nucleus of experienced personnel. Upon joining CAC Wackett immediately became the General Manager and he oversaw the entry into production of the first aircraft mass-produced in Australia, the ] development of the NA-16 he had earlier recommended. The second type to emerge from CAC under Wackett's stewardship was the eponymous ], the first prototype flying for the first time just after the outbreak of World War II. | Shortly after the establishment of the ] (CAC), Tugan Aircraft was purchased to give CAC a nucleus of experienced personnel. Upon joining CAC Wackett immediately became the General Manager and he oversaw the entry into production of the first aircraft mass-produced in Australia, the ] development of the NA-16 he had earlier recommended. The second type to emerge from CAC under Wackett's stewardship was the eponymous ], the first prototype flying for the first time just after the outbreak of World War II. | ||
Line 57: | Line 66: | ||
In many ways the story of Lawrence Wackett was inextricably linked with the history of the RAAF and CAC for over twenty years. He was hugely influential within the Australian aircraft industry as a whole and also within the RAAF, which often chose its combat aircraft types based on his recommendations. As already mentioned, this relationship began with the Wirraway. | In many ways the story of Lawrence Wackett was inextricably linked with the history of the RAAF and CAC for over twenty years. He was hugely influential within the Australian aircraft industry as a whole and also within the RAAF, which often chose its combat aircraft types based on his recommendations. As already mentioned, this relationship began with the Wirraway. | ||
During the Second World War, Wackett presided over a company – that had not even existed a mere three years before the outbreak – employing thousands of people, that was now delivering hundreds of aircraft as well as engines and propellers for those aircraft. Aircraft types emerging from CAC during the war period included the innovative and advanced ] and ], however like many of his pre-war designs these were built as prototypes only, being the victims of circumstance and changing requirements. He also suffered personal tragedy during the war when his son, Squadron Leader Wilbur Lawrence Wackett, was killed in 1944 while serving as a ] pilot with ].<ref> retrieved 2007-08-23.</ref> | During the Second World War, Wackett presided over a company – that had not even existed a mere three years before the outbreak – employing thousands of people, that was now delivering hundreds of aircraft as well as engines and propellers for those aircraft. Aircraft types emerging from CAC during the war period included the innovative and advanced ] and ], however like many of his pre-war designs these were built as prototypes only, being the victims of circumstance and changing requirements. He also suffered personal tragedy during the war when his son, Squadron Leader Wilbur Lawrence Wackett, was killed in 1944 while serving as a ] pilot with ].<ref>{{dead link|date=February 2024|bot=medic}}retrieved 2007-08-23.</ref> | ||
Following World War II his influence was again exerted over the RAAF when it became necessary to replace the ] first-generation jet fighters then in service. CAC initially offered the advanced ] design to the RAAF but this lost out to the ] then in development in the UK. When the P.1081 was cancelled, ]s were ordered in the interim, but the combat experiences of ] during the ] showed that a more modern type was urgently needed. The ] government of the day wanted to wait for the ] to become available, but Wackett decided otherwise. He negotiated with ] and ] to manufacture the ] jet fighter and ] engine of those companies under licence. The use of the Avon and other features such as using ] armament instead of ] machine guns necessitated a 60% redesign of the Sabre fuselage and resulted in perhaps the best variant of that aircraft.{{Citation needed|date=October 2007}} The RAAF ] at the time, ] ] (who had known Wackett since the time both served in No. 1 Squadron AFC), was suitably impressed by the Avon-Sabre as it became known, and threw his weight behind the project. The Sabre was ordered for the RAAF to both its and CAC's benefit. | Following World War II his influence was again exerted over the RAAF when it became necessary to replace the ] first-generation jet fighters then in service. CAC initially offered the advanced ] design to the RAAF but this lost out to the ] then in development in the UK. When the P.1081 was cancelled, ]s were ordered in the interim, but the combat experiences of ] during the ] showed that a more modern type was urgently needed. The ] government of the day wanted to wait for the ] to become available, but Wackett decided otherwise. He negotiated with ] and ] to manufacture the ] jet fighter and ] engine of those companies under licence. The use of the Avon and other features such as using ] armament instead of ] machine guns necessitated a 60% redesign of the Sabre fuselage and resulted in perhaps the best variant of that aircraft.{{Citation needed|date=October 2007}} The RAAF ] at the time, ] ] (who had known Wackett since the time both served in No. 1 Squadron AFC), was suitably impressed by the Avon-Sabre as it became known, and threw his weight behind the project. The Sabre was ordered for the RAAF to both its and CAC's benefit. | ||
When the time came to replace the Sabre, Wackett once again was largely responsible for deciding which aircraft was selected, albeit with less desirable results from CAC's point of view. The selection race was even more wide open than that which saw the Sabre selected, with six types in the running. The ] was considered (by almost everyone except Wackett it seems) to be the best aircraft for the RAAF; the process had got to the stage where the Starfighter had been selected and the decision was about to be made public when Wackett declared to George Jones (by this time a member of the ] of CAC), "I think that ''I'' should decide what aircraft the RAAF should buy!<ref>Quoted in ''Meteor, Sabre and Mirage in Australian Service'', |
When the time came to replace the Sabre, Wackett once again was largely responsible for deciding which aircraft was selected, albeit with less desirable results from CAC's point of view. The selection race was even more wide open than that which saw the Sabre selected, with six types in the running. The ] was considered (by almost everyone except Wackett it seems) to be the best aircraft for the RAAF; the process had got to the stage where the Starfighter had been selected and the decision was about to be made public when Wackett declared to George Jones (by this time a member of the ] of CAC), "I think that ''I'' should decide what aircraft the RAAF should buy!<ref>Quoted in ''Meteor, Sabre and Mirage in Australian Service'', p. 150.</ref>" and once more set to work to do just that. Wackett together with some members of the RAAF, had the decision for the Starfighter overturned in favour of the ] and CAC staff commenced working with Dassault (in the expectation that CAC would build the Mirage under licence as it had the Sabre and ] fighters). However in a serious reverse to CAC the ] was selected to build the Mirage instead, this being a move by the government of the day to rationalise the Australian aircraft industry. Wackett and the CAC Board undertook extensive lobbying to reverse the decision but the best that could be achieved was a subcontract to build the Mirage's wings, tails and engines. The Mirage itself was a sound choice on Wackett's part that proved well suited to the RAAF's needs{{Citation needed|date=October 2007}} and the production programme was the last that Wackett oversaw; he retired in 1966 with the delivery of Mirage components in full swing. | ||
Lawrence Wackett died on 18 March 1982. Four years after his death the company with which he was bound for so long, CAC, had ceased to exist. His name lives on – the ] established the Sir Lawrence Wackett Centre for Aerospace Design Technology in 1991 at the former CAC factory.<ref> retrieved 2007-08-24.</ref> | Lawrence Wackett died on 18 March 1982. Four years after his death the company with which he was bound for so long, CAC, had ceased to exist. His name lives on – the ] established the Sir Lawrence Wackett Centre for Aerospace Design Technology in 1991 at the former CAC factory.<ref> retrieved 2007-08-24.</ref> | ||
Line 72: | Line 81: | ||
* LJW5 – Wackett Warrigal II of 1930, (RAAF Experimental Section), powered by a 450 hp (340 kW) Armstrong Siddeley Jaguar radial engine. | * LJW5 – Wackett Warrigal II of 1930, (RAAF Experimental Section), powered by a 450 hp (340 kW) Armstrong Siddeley Jaguar radial engine. | ||
* LJW6 – Cockatoo Docks & Engineering Codock, a six passenger airliner powered by two Napier Javelin engines of 160 hp (120 kW), for Sir Charles Kingsford Smith. A later design for a larger aircraft, the 4-engined Corella, did not leave the drawing board, nor did his other aircraft concepts; VH-URP, the solitary Codock, was the only Wackett aircraft design built at the Dockyard. | * LJW6 – Cockatoo Docks & Engineering Codock, a six passenger airliner powered by two Napier Javelin engines of 160 hp (120 kW), for Sir Charles Kingsford Smith. A later design for a larger aircraft, the 4-engined Corella, did not leave the drawing board, nor did his other aircraft concepts; VH-URP, the solitary Codock, was the only Wackett aircraft design built at the Dockyard. | ||
* Wackett Waterhen |
* Wackett Waterhen – A 2 seat amphibian reconnaissance biplane proposed for the ] in 1931.<ref>National Archives of Australia, ''Aircraft for HMAS Albatross – Wackett's "Waterhen"'', NAA: A705, 13/1/21</ref> | ||
* LJW7 – ], Wackett left the Dockyards and joined Tugan Aircraft (itself an evolution of the earlier Genairco aircraft manufacturer), where the Codock design was developed into the LJW7 Gannet six/seven passenger airliner powered by two de Havilland Gipsy Six engines. This was the first of Wackett's designs to enter series production. The first aircraft was delivered in late 1935 and a total of eight Gannets were built for civilian customers and the RAAF. The RAAF took delivery of one new Gannet and subsequently operated another five second-hand examples. One RAAF aircraft was temporarily modified with Menasco engines as the LJW7A during World War II. | * LJW7 – ], Wackett left the Dockyards and joined Tugan Aircraft (itself an evolution of the earlier Genairco aircraft manufacturer), where the Codock design was developed into the LJW7 Gannet six/seven passenger airliner powered by two de Havilland Gipsy Six engines. This was the first of Wackett's designs to enter series production. The first aircraft was delivered in late 1935 and a total of eight Gannets were built for civilian customers and the RAAF. The RAAF took delivery of one new Gannet and subsequently operated another five second-hand examples. One RAAF aircraft was temporarily modified with Menasco engines as the LJW7A during World War II. | ||
* LJW8 – |
* "LJW8" – ], a two seat monoplane basic trainer with tandem enclosed cockpit, the CA-2 prototypes and CA-6 production Wackett Trainers, although not formally referred to as LJW8, are clearly acknowledged as his design, and has apparent design and structural links to the earlier LJW7 Tugan Gannet. They are his last formal design. Wackett left Tugan to join the Commonwealth Aircraft Corporation, where he led the local production of the licence built NA-16 as the CAC Wirraway. The second type to emerge from CAC under Wackett's stewardship was the eponymous Wackett Trainer, the first prototype flying for the first time just after the outbreak of World War II. The CAC Wackett trainer was the first aircraft type designed in-house by the Commonwealth Aircraft Corporation of Australia. The name was derived from its designer Lawrence Wackett. The type was designed to meet RAAF Specification 3/38 for an ab initio training aircraft. It was a tandem seat fixed tailwheel-undercarriage monoplane aircraft with a fuselage of steel tube and fabric construction and wings and tail made of wood. Despite the simplicity of the design, construction of the first of two CA-2 prototypes, begun in October 1938, was not completed until September 1939 (this was partly because CAC was still building its factory during this time period). The first prototype flew for the first time on 19 September 1939 fitted with a Gipsy Major engine. The aircraft proved to be underpowered with this engine so the second prototype was fitted with a Gipsy Six prior to its first flight in early November the same year (the first prototype was subsequently also re-engined with a Gypsy Six). Although in-flight performance was improved, the heavier engine negated any benefits to take-off performance obtained from the increased power, so the decision was made to install a Warner Scarab radial engine driving a Hamilton two-bladed propeller. The two prototypes were fitted with Scarabs in mid-1940.<ref>],</ref> With two CA-2 prototypes and 200 CA-6 production examples, the type was the most numerous of Wackett's designs to be produced, (and his only design to enter mass production), and also the most successful, with 200 serving in the RAAF as elementary and wireless trainers, Following retirement and disposal at the end of the war, with 30 being sold to the Netherlands East Indies ML-KNIL, the first Australian design to serve with a foreign military service, more than 40 went into civil service after WW2 on the Australian VH- civil register and 25 were later modified into the K.S.3 Cropduster and the Yeoman Cropmaster. It is also the only Wackett design to be preserved through extent survivors. | ||
* Lawrence Wackett clearly played a significant technical role in the introduction and production of the NA-16 / NA-33, including its conversion to British hardware etc as the CAC Wirraway, and is likely to have also had a strong technical influence over the designs of the CA-12, CA-13 and CA-14 Boomerang, CA-4 and CA-11 Woomera bomber, CA-15 Fighter, the CA-28 Ceres, CA-22 and CA-25 Winjeel and CA-26 & CA-27 Avon Sabre, but these later aircraft were all products of what had become a very large corporation with an extensive design team, and Wackett by this time had moved onto the management phase of his career.<ref>Aircraft Pioneer: an Autobiography Angus and Robertson, 1972</ref> | * Lawrence Wackett played a major design role on the CA-4 Wackett Bomber, that also took his name, but by that time he was leading a design team consisting of Herb Knight, Schulz, Frewin and Fred David among others. | ||
* Lawrence Wackett clearly played a significant technical role in the introduction and local licensed production of the NA-16 / NA-33, including its conversion to British hardware etc as the CAC Wirraway, and is likely to have also had a strong technical influence over the designs of the CA-12, CA-13, CA-19 and CA-14 Boomerang, CA-4 Wackett Bomber and later CA-11 Woomera bomber, CA-15 Fighter, the CA-28 Ceres, CA-22 and CA-25 Winjeel and CA-26 & CA-27 Avon Sabre, but these later aircraft were all products of what had become a very large corporation with an extensive design team, and Wackett by this time had moved onto the management phase of his career.<ref>Aircraft Pioneer: an Autobiography Angus and Robertson, 1972</ref> | |||
==Awards and honours== | ==Awards and honours== | ||
Line 84: | Line 94: | ||
*1978 ] ].<ref> {{webarchive|url=https://web.archive.org/web/20070830045714/http://nsw.royalsoc.org.au/awards/jamescook.html |date=30 August 2007 }} retrieved 2007-08-24.</ref> | *1978 ] ].<ref> {{webarchive|url=https://web.archive.org/web/20070830045714/http://nsw.royalsoc.org.au/awards/jamescook.html |date=30 August 2007 }} retrieved 2007-08-24.</ref> | ||
* ]. | * ]. | ||
* 2015 ] |
* 2015 ]<ref>{{Cite web|url=http://leaders.slq.qld.gov.au/inductees/sir-lawrence-wackett-kbe-dfc-afc/|title=Lawrence Wackett|website=Queensland Business Leaders Hall of Fame|access-date=7 August 2017}}</ref> | ||
==Bibliography== | ==Bibliography== | ||
Line 92: | Line 102: | ||
==Notes== | ==Notes== | ||
{{Reflist |
{{Reflist}} | ||
==References== | ==References== | ||
Line 121: | Line 131: | ||
* | * | ||
* | * | ||
*, ] | |||
{{Authority control}} | {{Authority control}} | ||
Line 127: | Line 138: | ||
] | ] | ||
] | ] | ||
] | |||
] | ] | ||
] | ] | ||
Line 135: | Line 147: | ||
] | ] | ||
] | ] | ||
] | |||
] | ] |
Latest revision as of 22:08, 20 August 2024
Australian aviation pioneer "Wackett" redirects here. For the trainer aircraft, see CAC Wackett.
Sir Lawrence Wackett | |
---|---|
Born | (1896-01-02)2 January 1896 Townsville, Queensland |
Died | 18 March 1982(1982-03-18) (aged 86) St Leonards, New South Wales |
Allegiance | Australia |
Service | Australian Flying Corps (1915–21) Royal Australian Air Force (1921–30) |
Years of service | 1913–1930 |
Rank | Wing Commander |
Commands | RAAF Experimental Section (1924–30) No. 7 Squadron (1919) |
Battles / wars | |
Awards | Knight Commander of the Order of the British Empire Distinguished Flying Cross Air Force Cross Mentioned in Despatches |
Relations | Air Vice Marshal Ellis Wackett (brother) |
Sir Lawrence James Wackett KBE, DFC, AFC (2 January 1896 – 18 March 1982) is widely regarded as "father of the Australian aircraft industry". He has been described as "one of the towering figures in the history of Australian aviation covering, as he did, virtually all aspects of activities: pilot, designer of airframes and engines, entrepreneur and manager". He was knighted for his services to aviation and was a winner of the Oswald Watt Gold Medal. He was also a keen angler and wrote two books on the subject.
Early years, war service and education
Wackett was born in Townsville, Queensland, on 2 January 1896. He joined the Australian Army and graduated from the Royal Military College, Duntroon, then with the rank of lieutenant joined No. 1 Squadron of the Australian Flying Corps (AFC) which had formed at Point Cook the day before his 20th birthday. He was one of twelve pilots that went to Egypt with the Squadron to operate in support of the Sinai and Palestine Campaign, embarking on 16 March 1916 and arriving at Suez four weeks later.
In Egypt he designed a mounting to attach a Lewis Gun to the upper wing of his BE2c; considerably improving the fighting ability of a type that was described by Hudson Fysh (who served with Wackett in No. 1 Squadron.) as the "poorest of all offensive, or defensive aircraft". The BE2c was normally armed with a machine gun at the observer's position, but the observer sat in front of the pilot and behind the engine, and between the upper and lower wings. This meant that the machine gun could only be fired in fairly narrow arcs if the Observer was to avoid hitting his own aircraft. Wackett's modification meant that all he had to do was point the whole aircraft at his adversary and that he had a measure of protection when on a bombing mission (because the BE2c could carry bombs or an Observer, but not both).
Wackett used his modified BE2c to good effect on several occasions. He once gave the enemy pause when while on a reconnaissance mission he was attacked by two Rumpler C.Is. Wackett flew towards them firing the gun and the Rumplers broke off the fight. On 11 November 1916 he was in his BE2c on a 7-hour bombing mission to Beersheba with four other BE2s and a Martinsyde G.100 when the formation came under attack by two much superior German aircraft. Wackett was able to use his aircraft to assist the Martinsyde in defending their comrades and fighting off the attack. On the night of the 14/15 January 1917, 16 Jewish workers (mostly masons, carpenters and plumbers) who had been working in Beer Sheba under the Turkish Military Authority, were sleeping in a railway carriage at Beer Sheba Railway Station when a RAF BC2c dropped a 45 kg bomb very near the carriage killing all of them. Later investigations by British and Australian air-force historians confirmed that the pilot was an Australian. Further investigation and in-depth study of British, Australian and Turkish records by researcher Dr. Ilan Gal Peer, confirmed that the most likely pilot was Wackett of Number 1 Squadron attached to EEF, who believed a non-existent ammunitions shed was located in the immediate vicinity.
Wackett later transferred to No. 3 Squadron AFC in France and played a significant role in the Battle of Hamel fought on 4 July 1918. Captured German documents revealed that they had been experimenting with dropping ammunition from aircraft and No. 3 Squadron was asked to investigate doing the same. Wackett was asked to do the work as his reputation had spread; 'he had a gift for mechanical inventions' according to his superiors. Now a captain, he devised a small parachute that could be used to drop supplies to troops, designed a modified bomb rack to hold the supplies and then trained No. 3 Squadron personnel in the required technique. General Monash's battle plan for Hamel involved resupplying the engaged machine-gunners with ammunition dropped by aircraft. In the event No. 3 Squadron was assigned other tasks during the battle and the ammunition dropping was performed by No. 9 Squadron RAF. Monash later wrote, "at least 100,000 rounds of ammunition were during the battle with obvious economy in lives and wounds. The method thus initiated became general in later months". Later that year, on 25 September, Wackett undertook a daring reconnaissance mission in 3 Squadron's first Bristol F.2 Fighter, when he penetrated six miles (10 km) behind enemy lines to take aerial photographs of the German Joncourt-Villers Outreaux line, that were needed for a forthcoming attack. Two days later he carried out an ammunition resupply flight to some isolated troops using the equipment he had designed. As a result of these two actions he was awarded the Distinguished Flying Cross. By the end of the war two months later he had been promoted to the rank of major. On 6 January 1919 he was appointed the Commanding Officer of No. 7 Squadron AFC based at Leighterton in England. 7 Sqn. had acted as the training unit for No. 3 Squadron during the recent conflict and Wackett remained the CO until the Squadron was disbanded in March that year, at which time he returned to Australia.
Post-war, Wackett was one of just 21 officers who formed the nucleus of the new Royal Australian Air Force (RAAF) in 1921. He had a strong belief in the need to develop an indigenous aircraft industry and completed a Bachelor of Science degree at the University of Melbourne, then had two years of advanced training in aircraft design under Frank Barnwell, designer of the F.2 Fighter aircraft that he had flown while serving with No. 3 Squadron AFC. He entered and won second prize in the 1924 Low-Powered Aeroplane Competition (held at Richmond in December that year) with his first design, the Warbler. This was a parasol wing monoplane powered by an engine also of his own design, the Wizard, a two-cylinder horizontally-opposed monosoupape-type pusher engine developing 25 hp (19 kW).
Wackett and the RAAF Experimental Section
Wackett learned of war surplus machine tools slated for disposal from a workshop in Randwick, Sydney, and prevailed upon his superiors to acquire the workshop. The RAAF Experimental Aircraft Section was thus established in January 1924 and Wackett, by then a squadron leader, was placed in charge. He tried to obtain permission to design and build an entirely Australian aircraft, but the RAAF had no money in its budget for this and would not give the go-ahead unless Wackett could obtain funds from some other source. Wackett then approached the Controller of Civil Aviation Colonel H. C. Brinsmead and managed to persuade the Civil Aviation Branch (of the Department of Defence, there not being a separate Department of Civil Aviation at this time) to fund the construction of a small flying boat.
The result was the Widgeon, a wooden hull biplane flying boat powered by an Armstrong Siddeley Puma of 230 hp (170 kW) located below and forward of the upper wing. This aircraft, the first flying boat to be wholly designed and constructed in Australia, was registered to the Civil Aviation Branch out of the Australian sequence (i.e. G-AUxx) as G-AEKB, after E. K. Bowden, Minister for Defence. The aircraft was launched on 7 July 1925 into Botany Bay. The following day it hit a sandbank during taxi tests and later overturned whilst attempting a takeoff. Wackett was on board with Brinsmead and two mechanics; all were unhurt. The aircraft was repaired and made its first flight on 3 December that year. Wackett subsequently installed a more powerful 300 hp (220 kW) ADC Nimbus engine and an undercarriage, converting it into an amphibian. Following the modifications the Widgeon I was transferred to the RAAF and used at Point Cook for flying boat training from 1927. The aircraft operated with the RAAF until 1929, when it was scrapped. A larger amphibian, the Widgeon II, powered by a 440 hp (330 kW) Armstrong Siddeley Jaguar engine, was the next aircraft to emerge from the Experimental Section workshop. Wackett himself flew the Widgeon II extensively, later saying, "I proved its capability by flying it on a 9,000-mile (14,000 km) journey across and around part of the Australian continent in 1928". The next aircraft developed at Randwick was the two-seat Warrigal I of 1929, a biplane trainer of conventional design, powered by a 180 hp (130 kW) Armstrong Siddeley Lynx radial engine. This was followed in 1930 by the improved Warrigal II, powered by a 450 hp (340 kW) Armstrong Siddeley Jaguar radial engine.
On 21 March 1927, Wackett was elected the inaugural chairman of the NSW Division of the Institution of Aeronautical Engineers (IoAE) in Sydney. The following year, after the amalgamation of the Royal Aeronautical Society (RAeS) and the IoAE parent body in Britain, he was appointed the inaugural deputy chairman of the Australasian Branch of the RAeS. He also found time to act as the New South Wales RAAF Aide de Camp to the Governor General, although the duties were not onerous.
Wackett in the 1930s
As a result of a government-sponsored report and pressure from British manufacturers, who saw Wackett as a threat to their monopoly on Australian orders, the Randwick Station was closed in 1931. Wackett resigned from the RAAF with the rank of wing commander and transferred (with some personnel and equipment) to the Cockatoo Island Naval Dockyard. Here he was involved in the design of watercraft as well as aircraft. He continued working for the RAAF – a single de Havilland D.H.60G Gipsy Moth was built at the Dockyard under his supervision and entered RAAF service in 1933. He also undertook civilian aviation projects including repair and modification projects, and built the Cockatoo Docks & Engineering LJW.6 Codock, a six passenger airliner powered by two Napier Javelin engines of 160 hp (120 kW), for Sir Charles Kingsford Smith. A later design for a larger aircraft, the 4-engined Corella, did not leave the drawing board, nor did his other aircraft concepts; VH-URP, the solitary Codock, was the only Wackett aircraft design built at the Dockyard. His marine designs at the Dockyard included small motorboats such as the Cettien (which won the Griffith Cup in 1934 and 1935) and the racing hydroplane Century Tire II, and larger commercial passenger-carrying vessels as well.
In 1934, Wackett and some of his staff joined Tugan Aircraft at Mascot aerodrome. The following year, following a series of accidents involving Australian-operated de Havilland D.H.86s, he and his brother Ellis (who was then the Director of RAAF Technical Services) were asked to provide their views and recommendations to a special conference convened by the Civil Aviation Branch, held to examine the type and its shortcomings. In 1936 he was seconded to an aviation syndicate to lead a technical mission to Europe (including future enemy nation Nazi Germany) and the United States to evaluate modern aircraft types and select a type suitable to Australia's defence needs and within Australia's capabilities to build. The three-man mission lasted five months and on its return advised that the North American NA-16 was the most suitable type.
Wackett was able to acquire the rights for the NA-32 and NA-33 versions of the aircraft, plus the 600-hp Pratt & Whitney R-1340-S1H1G engine. On completion of the mission Wackett returned to Tugan Aircraft, where the Codock design was developed into the LJW7 Gannet six/seven passenger airliner powered by two de Havilland Gipsy Six engines. This was the first of Wackett's designs to enter series production. The first aircraft was delivered in late 1935 and a total of eight Gannets were built for civilian customers and the RAAF. The RAAF took delivery of one new Gannet and subsequently operated another five second-hand examples. One RAAF aircraft was temporarily modified with Menasco engines as the LJW7A during World War II.
Shortly after the establishment of the Commonwealth Aircraft Corporation (CAC), Tugan Aircraft was purchased to give CAC a nucleus of experienced personnel. Upon joining CAC Wackett immediately became the General Manager and he oversaw the entry into production of the first aircraft mass-produced in Australia, the CAC Wirraway development of the NA-16 he had earlier recommended. The second type to emerge from CAC under Wackett's stewardship was the eponymous Wackett Trainer, the first prototype flying for the first time just after the outbreak of World War II.
Wackett, CAC and the RAAF in WWII and beyond
In many ways the story of Lawrence Wackett was inextricably linked with the history of the RAAF and CAC for over twenty years. He was hugely influential within the Australian aircraft industry as a whole and also within the RAAF, which often chose its combat aircraft types based on his recommendations. As already mentioned, this relationship began with the Wirraway.
During the Second World War, Wackett presided over a company – that had not even existed a mere three years before the outbreak – employing thousands of people, that was now delivering hundreds of aircraft as well as engines and propellers for those aircraft. Aircraft types emerging from CAC during the war period included the innovative and advanced Woomera and CA-15, however like many of his pre-war designs these were built as prototypes only, being the victims of circumstance and changing requirements. He also suffered personal tragedy during the war when his son, Squadron Leader Wilbur Lawrence Wackett, was killed in 1944 while serving as a Beaufighter pilot with No. 31 Squadron RAAF.
Following World War II his influence was again exerted over the RAAF when it became necessary to replace the de Havilland Vampire first-generation jet fighters then in service. CAC initially offered the advanced CAC CA-23 design to the RAAF but this lost out to the Hawker P.1081 then in development in the UK. When the P.1081 was cancelled, Gloster Meteors were ordered in the interim, but the combat experiences of No. 77 Squadron RAAF during the Korean War showed that a more modern type was urgently needed. The anglophile government of the day wanted to wait for the Hawker Hunter to become available, but Wackett decided otherwise. He negotiated with North American Aviation and Rolls-Royce to manufacture the Sabre jet fighter and Avon engine of those companies under licence. The use of the Avon and other features such as using 30mm Aden cannon armament instead of .50in Browning machine guns necessitated a 60% redesign of the Sabre fuselage and resulted in perhaps the best variant of that aircraft. The RAAF Chief of Air Staff at the time, Air Marshal George Jones (who had known Wackett since the time both served in No. 1 Squadron AFC), was suitably impressed by the Avon-Sabre as it became known, and threw his weight behind the project. The Sabre was ordered for the RAAF to both its and CAC's benefit.
When the time came to replace the Sabre, Wackett once again was largely responsible for deciding which aircraft was selected, albeit with less desirable results from CAC's point of view. The selection race was even more wide open than that which saw the Sabre selected, with six types in the running. The Lockheed Starfighter was considered (by almost everyone except Wackett it seems) to be the best aircraft for the RAAF; the process had got to the stage where the Starfighter had been selected and the decision was about to be made public when Wackett declared to George Jones (by this time a member of the board of directors of CAC), "I think that I should decide what aircraft the RAAF should buy!" and once more set to work to do just that. Wackett together with some members of the RAAF, had the decision for the Starfighter overturned in favour of the Dassault Mirage and CAC staff commenced working with Dassault (in the expectation that CAC would build the Mirage under licence as it had the Sabre and P-51 Mustang fighters). However in a serious reverse to CAC the Government Aircraft Factories was selected to build the Mirage instead, this being a move by the government of the day to rationalise the Australian aircraft industry. Wackett and the CAC Board undertook extensive lobbying to reverse the decision but the best that could be achieved was a subcontract to build the Mirage's wings, tails and engines. The Mirage itself was a sound choice on Wackett's part that proved well suited to the RAAF's needs and the production programme was the last that Wackett oversaw; he retired in 1966 with the delivery of Mirage components in full swing.
Lawrence Wackett died on 18 March 1982. Four years after his death the company with which he was bound for so long, CAC, had ceased to exist. His name lives on – the RMIT University established the Sir Lawrence Wackett Centre for Aerospace Design Technology in 1991 at the former CAC factory.
Aircraft designs
- LJW1 – Wackett Warbler, a parasol wing monoplane of 1924, powered by an engine also of his own design, the Wizard, a two-cylinder horizontally-opposed monosoupape-type pusher engine developing 25 hp (19 kW).
- LJW2 – Wackett Widgeon (I), (RAAF Experimental Section), a wooden hull biplane flying boat powered by an Armstrong Siddeley Puma of 230 hp (170 kW) located below and forward of the upper wing. This aircraft, the first flying boat to be wholly designed and constructed in Australia, was registered to the Civil Aviation Branch out of the Australian sequence (i.e. G-AUxx) as G-AEKB, after E. K. Bowden, Minister for Defence. The aircraft was launched on 7 July 1925 into Botany Bay.
- LJW3 – Wackett Widgeon II, (RAAF Experimental Section), a biplane amphibian, powered by a 440 hp (330 kW) Armstrong Siddeley Jaguar engine, was the next aircraft to emerge from the Experimental Section workshop. Wackett himself flew the Widgeon II extensively, later saying, "I proved its capability by flying it on a 9,000-mile (14,000 km) journey across and around part of the Australian continent in 1928".
- LJW4 – Wackett Warrigal I of 1929, (RAAF Experimental Section), a two seat biplane trainer of conventional design, powered by a 180 hp (130 kW) Armstrong Siddeley Lynx radial engine.
- LJW5 – Wackett Warrigal II of 1930, (RAAF Experimental Section), powered by a 450 hp (340 kW) Armstrong Siddeley Jaguar radial engine.
- LJW6 – Cockatoo Docks & Engineering Codock, a six passenger airliner powered by two Napier Javelin engines of 160 hp (120 kW), for Sir Charles Kingsford Smith. A later design for a larger aircraft, the 4-engined Corella, did not leave the drawing board, nor did his other aircraft concepts; VH-URP, the solitary Codock, was the only Wackett aircraft design built at the Dockyard.
- Wackett Waterhen – A 2 seat amphibian reconnaissance biplane proposed for the Royal Australian Navy in 1931.
- LJW7 – Tugan Gannet, Wackett left the Dockyards and joined Tugan Aircraft (itself an evolution of the earlier Genairco aircraft manufacturer), where the Codock design was developed into the LJW7 Gannet six/seven passenger airliner powered by two de Havilland Gipsy Six engines. This was the first of Wackett's designs to enter series production. The first aircraft was delivered in late 1935 and a total of eight Gannets were built for civilian customers and the RAAF. The RAAF took delivery of one new Gannet and subsequently operated another five second-hand examples. One RAAF aircraft was temporarily modified with Menasco engines as the LJW7A during World War II.
- "LJW8" – CAC Wackett, a two seat monoplane basic trainer with tandem enclosed cockpit, the CA-2 prototypes and CA-6 production Wackett Trainers, although not formally referred to as LJW8, are clearly acknowledged as his design, and has apparent design and structural links to the earlier LJW7 Tugan Gannet. They are his last formal design. Wackett left Tugan to join the Commonwealth Aircraft Corporation, where he led the local production of the licence built NA-16 as the CAC Wirraway. The second type to emerge from CAC under Wackett's stewardship was the eponymous Wackett Trainer, the first prototype flying for the first time just after the outbreak of World War II. The CAC Wackett trainer was the first aircraft type designed in-house by the Commonwealth Aircraft Corporation of Australia. The name was derived from its designer Lawrence Wackett. The type was designed to meet RAAF Specification 3/38 for an ab initio training aircraft. It was a tandem seat fixed tailwheel-undercarriage monoplane aircraft with a fuselage of steel tube and fabric construction and wings and tail made of wood. Despite the simplicity of the design, construction of the first of two CA-2 prototypes, begun in October 1938, was not completed until September 1939 (this was partly because CAC was still building its factory during this time period). The first prototype flew for the first time on 19 September 1939 fitted with a Gipsy Major engine. The aircraft proved to be underpowered with this engine so the second prototype was fitted with a Gipsy Six prior to its first flight in early November the same year (the first prototype was subsequently also re-engined with a Gypsy Six). Although in-flight performance was improved, the heavier engine negated any benefits to take-off performance obtained from the increased power, so the decision was made to install a Warner Scarab radial engine driving a Hamilton two-bladed propeller. The two prototypes were fitted with Scarabs in mid-1940. With two CA-2 prototypes and 200 CA-6 production examples, the type was the most numerous of Wackett's designs to be produced, (and his only design to enter mass production), and also the most successful, with 200 serving in the RAAF as elementary and wireless trainers, Following retirement and disposal at the end of the war, with 30 being sold to the Netherlands East Indies ML-KNIL, the first Australian design to serve with a foreign military service, more than 40 went into civil service after WW2 on the Australian VH- civil register and 25 were later modified into the K.S.3 Cropduster and the Yeoman Cropmaster. It is also the only Wackett design to be preserved through extent survivors.
- Lawrence Wackett played a major design role on the CA-4 Wackett Bomber, that also took his name, but by that time he was leading a design team consisting of Herb Knight, Schulz, Frewin and Fred David among others.
- Lawrence Wackett clearly played a significant technical role in the introduction and local licensed production of the NA-16 / NA-33, including its conversion to British hardware etc as the CAC Wirraway, and is likely to have also had a strong technical influence over the designs of the CA-12, CA-13, CA-19 and CA-14 Boomerang, CA-4 Wackett Bomber and later CA-11 Woomera bomber, CA-15 Fighter, the CA-28 Ceres, CA-22 and CA-25 Winjeel and CA-26 & CA-27 Avon Sabre, but these later aircraft were all products of what had become a very large corporation with an extensive design team, and Wackett by this time had moved onto the management phase of his career.
Awards and honours
- Knight Commander of the Order of the British Empire.
- Distinguished Flying Cross.
- Air Force Cross
- 1974 Royal Federation of Aero Clubs of Australia Oswald Watt Gold Medal.
- 1978 Royal Society of New South Wales James Cook Medal.
- Fellow of the Royal Aeronautical Society.
- 2015 Queensland Business Leaders Hall of Fame
Bibliography
- My Hobby is Trout Fishing J.T. Picken & Sons, 1946.
- Studies of an Angler J.T. Picken & Sons, 1950.
- Aircraft Pioneer: an Autobiography Angus and Robertson, 1972.
Notes
- ^ Technology in Australia 1788–1988 p. 498.
- University of Melbourne Bright Sparcs biographical website retrieved 2007-08-16.
- ^ The Royal Australian Air Force: An Illustrated History p. 41.
- ^ Randwick City Council Social History Archived 26 September 2007 at the Wayback Machine web page about Wackett, retrieved 2007-08-16.
- ^ Military Aircraft of Australia 1909–1918.
- 1 Sqn AFC History retrieved 2007-08-17.
- Centenary of Deaths of 16 Jewish Civilian Workers in Beer Sheva Station, HaRakevet, Issue 119, p. 23.
- The A.I.F. In France p270.
- AWM honours records search retrieved 2007-08-22.
- Wackett engine retrieved 2007-08-16.
- Quoted on Flying Boats of the World page retrieved on 2007-08-17.
- Meggs, pp. 294–301
- RAeS Australian Division History retrieved 2077-08-24.
- Helson, Peter (2006). Ten Years at the Top; an online version of a biography of RAAF Chief of Air Staff George Jones Archived 29 February 2008 at the Wayback Machine. Australian Defence Force Academy campus of the University of New South Wales, submitted as a postgraduate thesis. There is a footnote on p24 referring to Wackett's own autobiography Aircraft Pioneer and mentioning his serving as NSW RAAF ADC. Retrieved on 2007-08-17.
- ^ National Archives of Australia list of Wackett Cockatoo Island papers. Retrieved 2007-08-16.
- Tiger Moth, CT-4, Wackett & Winjeel in Australian Service p38.
- ADF serials D.H.60 list retrieved 2007-08-16.
- E. C. Griffith Cup History retrieved 2007-08-17.
- Air Crash Vol. I pp. 79–80 & Air Crash Vol. II p. 110.
- Hagedorn, Dan (2009). North American's T-6: a definitive history of the world's most famous trainer. North Branch, MN: Specialty Press. p. 53. ISBN 9781580071246.
- Record of Wilbur Wackett's deathretrieved 2007-08-23.
- Quoted in Meteor, Sabre and Mirage in Australian Service, p. 150.
- RMIT Wackett Centre page retrieved 2007-08-24.
- National Archives of Australia, Aircraft for HMAS Albatross – Wackett's "Waterhen", NAA: A705, 13/1/21
- CAC Wackett,
- Aircraft Pioneer: an Autobiography Angus and Robertson, 1972
- James Cook Medal recipients Archived 30 August 2007 at the Wayback Machine retrieved 2007-08-24.
- "Lawrence Wackett". Queensland Business Leaders Hall of Fame. Retrieved 7 August 2017.
References
- Isaacs, Wing Commander Keith. Military Aircraft of Australia 1909–1918. Australian War Memorial. ISBN 0-642-99374-2
- Sattler, Steve. HaRakevet. No ISBN.
- Odgers, George. The Royal Australian Air Force: An Illustrated History. Child & Henry Publishing Pty. Ltd. ISBN 0-86777-368-5
- Wilson, Stewart. Meteor, Sabre and Mirage in Australian Service. Aerospace Publications Pty. Ltd. ISBN 0-9587978-2-X
- Wilson, Stewart. Wirraway, Boomerang & CA-15 in Australian Service. Aerospace Publications Pty. Ltd. ISBN 0-9587978-8-9
- Bean, Charles Edwin Woodrow. The Official History of Australia in the War of 1914–1918 Volume VI, The A.I.F. in France, May 1918-the Armistice. University of Queensland Press. ISBN 0-7022-1753-0
- Wilson, Stewart. Tiger Moth, CT-4, Wackett & Winjeel in Australian Service. Aerospace Publications Pty. Ltd. ISBN 1-875671-16-1
- Cookson, Bert. The Historic Civil Aircraft Register of Australia G-AUAA to VH-UZZ. Privately published by AustAirData, no ISBN.
- Job, Macarthur. Air Crash Volume One, 1921–1939. Aerospace Publications Pty. Ltd. ISBN 0-9587978-9-7
- Job, Macarthur. Air Crash Volume Two. Aerospace Publications Pty. Ltd. ISBN 1-875671-01-3
- Technology in Australia 1788–1988. Australian Academy of Technological Sciences and Engineering. ISBN 0-908029-49-7
- Civil Aviation Historical Society website Widgeon I page. Retrieved 2007-08-16.
- List of Australian-designed aircraft retrieved 2007-08-16.
- Meggs, Keith Raymond (2009). Australian-built Aircraft and the Industry Volume 1. Seymour, Victoria: Finger-Four Publishing. ISBN 978-1-920892-77-7.
External links
- Photograph of Ivor McIntyre and Lawrence Wackett (on right) taken at the time Wackett flew the Widgeon around Australia.
- Image, Aircraft mechanics preparing the Warbler aeroplane, during light aircraft trials, December 1924, from State Library of Queensland.
- Widgeon I history & images.
- Flying Boats of the World Widgeon page.
- Images of various Wackett designs.
- List of Wackett design papers.
- Tugan Gannet image.
- Image of a Tugan Gannett (sic) at Mascot
- Queensland Business Leaders Hall of Fame
- Sir Lawrence Wackett digital stories and oral history: Queensland Business Leaders Hall of Fame 2015, State Library of Queensland
- 1896 births
- 1982 deaths
- Military personnel from Queensland
- Australian military personnel of World War I
- Royal Military College, Duntroon graduates
- Royal Australian Air Force personnel of World War II
- Fellows of the Royal Aeronautical Society
- Australian Knights Commander of the Order of the British Empire
- People from Townsville
- Australian recipients of the Air Force Cross (United Kingdom)
- Australian recipients of the Distinguished Flying Cross (United Kingdom)
- Australian aerospace engineers