Safety harness: Difference between revisions

Browse history interactively ← Previous edit Next edit →Content deleted Content addedVisual WikitextInline

Revision as of 12:05, 24 July 2017 editGB fan (talk \| contribs)Oversighters, Administrators103,343 edits Reverted 1 edit by 61.16.152.146 (talk): Spam, website selling harnesses put in as a reference. (TW)← Previous edit		Revision as of 12:14, 24 July 2017 edit undoGB fan (talk \| contribs)Oversighters, Administrators103,343 edits remove image, while they roofers do have harneses on, they are small in the image and hard to see and they aren't worn correctly or even being used, not tied ff to anythingNext edit →
Line 1:		Line 1:
	]		]
	]
	A '''safety harness''' is a form of ] designed to protect a person, animal, or object from ] or damage. The harness is an attachment between a stationary and non-stationary object and is usually fabricated from ], ] or ] and locking hardware.<ref></ref> Some safety harnesses are used in combination with a ], which is used to regulate ] when the end of the rope is reached. One example would be ].		A '''safety harness''' is a form of ] designed to protect a person, animal, or object from ] or damage. The harness is an attachment between a stationary and non-stationary object and is usually fabricated from ], ] or ] and locking hardware.<ref></ref> Some safety harnesses are used in combination with a ], which is used to regulate ] when the end of the rope is reached. One example would be ].

Revision as of 12:14, 24 July 2017

A safety harness is a form of protective equipment designed to protect a person, animal, or object from injury or damage. The harness is an attachment between a stationary and non-stationary object and is usually fabricated from rope, cable or webbing and locking hardware. Some safety harnesses are used in combination with a shock absorber, which is used to regulate deceleration when the end of the rope is reached. One example would be bungee jumping.

In North America, Safety Harness for protection against falls from heights in industrial and construction activities are covered by design performance standards issued by ANSI (American National Standards Institute) in the United States and by CSA (Canadian Standards Association) in Canada. Specifically, the standards issued are ANSI Z359.1 and CSA Z259.10. These standards are updated approximately every four to five years so it is important to ensure the latest version is referenced.

Classifications

Fall Protection Systems

Listed below are different types of fall safety equipment and their recommended usage.

Class 1 Body belts (single or double D-ring) are designed to restrain a person in a hazardous work position to prevent fall or to arrest a fall completely within 3 foot of movement (OSHA). Amends must be made to keep the line rigid at all times. A harness should also be used.

Class 2 Chest harnesses are used when there are only limited fall hazards (no vertical free fall hazard), or for retrieving persons such as removal of persons from a tank or a bin.

Class 3 Full body harnesses are designed to arrest the most severe free falls.

Class 4 Suspension belts are independent work supports used to suspend a worker, such as boatswain's chairs or raising or lowering harnesses .