Article snapshot taken from Wikipedia with creative commons attribution-sharealike license.
Give it a read and then ask your questions in the chat.
We can research this topic together.
A 9.0 magnitude earthquake strikes off the coast of Honshu Island at a depth of about 24 kilometres (15 mi). Fukushima I power plant's nuclear reactors 1, 2, and 3 are automatically shut down by the shake. Nuclear reactors 4, 5, and 6 were undergoing routine maintenance and were not operating. The tremor has the additional effect of causing the power plant to be cut off from the Japanese electricity grid, meaning that power is lost to the cooling pumps. Tokyo Electric Power Co (TEPCO), the plant's operator, finds that units 1 and 2 are not operating correctly and notifies the proper officials.
1600
The Nuclear and Industrial Safety Agency of Japan initiates an emergency headquarters in an attempt to gather information on the 55 nuclear reactors in Japan.
1930
Prime MinisterNaoto Kan declares a nuclear emergency status. This is announced by Yukio Edano, Chief Cabinet officer in Japan. Japanese government officials try to comfort the people of Japan by telling them that the proper procedures are being undertaken. They also announce that no radioactive materials have been located.
2100
An evacuation order is issued by the government to persons within a 3 kilometres (1.9 mi) radius of the Fukushima station. Those within a 10 kilometres (6.2 mi) radius are told that they can remain in their homes and carry on with regular activities until told otherwise.
The emergency generators fail, subsequently causing the cooling system to fail, and the pressure in the nuclear units builds up. This pressure buildup is the result of residual decay heat causing the coolant, which is not being circulated, to evaporate. The coolant circuit pressure increase is controlled by pressure release valves. Because of the lack of release, there is a pressure increase within the containment chamber at the reactor building.
TEPCO announces that pressure inside reactor unit 1 is more than twice normal levels.
Saturday, 12 March
0530
In an attempt to release pressure within the reactor unit, a consensus is reached to vent steam out of the unit into the air. This steam contains some small traces of radioactive material.
1009
TEPCO confirms that a small amount of vapor has been released into the air to release tension in the reactor unit.
1058
Tensions are high with pressure still remaining inside the 2nd reactor. In order to alleviate some of this pressure, a consensus is reached to, once more, vent radioactive vapor into the air.
1536
Unit 1 at Fukushima I: A massive event is caught on cameras. These cameras document an explosion on the outer structure of one of four buildings at the plant. It also documents the outer structure collapsing. TEPCO announces that four persons who are employed at the power plant have been injured. (The explosion was a hydrogen explosion)
2000
A cloud of uncertainty surrounds the actual cause of the blast and the damage caused.
Yukio Edano announces that the concrete building surrounding the steel reactor container has collapsed as a result of the explosion; however no damage has been inflicted on the reactor itself.
Monday, 14 March
1115
The building surrounding Reactor 3 of Fukushima I exploded, presumably due to the ignition of built up hydrogen gas. No health risk reported, though 600 people have been ordered to stay indoors.
1120 (approximate)
It was reported that the outer reactor building was blown apart, but the inner containment vessel was not breached. TEPCO stated that one worker was injured and seven missing.
2100 (approximate)
Fuel rods at the reactor #2 of the Fukushima nuclear plant were fully exposed. TEPCO earlier said the cooling system had been lost and began injecting seawater into the reactor to cool it down.
2116
Yukio Edano affirms that the reactor number 2 is unlikely to explode. In addition, he stated that there is ongoing work to cool down the reactor
Unit 1 At Fukushima II is shut down automatically and reactor water level is stable. Offsite power is available.
Saturday, 12 March
0348
Injection by Make-up Water Condensate System begins.
0522
The temperature of the suppression chamber exceeds 100 degrees. As the reactor pressure suppression function was lost, at 5:22AM, it was determined that a specific incident stipulated in article 15, clause 1 has occurred.
0819
A special alarm, which alerts that the position of one control rod (used to halt the reactor) is unclear, is sounded. Whether it is fully inserted into the reactor or outside the reactor, allowing it to continue generating heat.
0943
Plant workers prepare to reduce the pressure of the reactor containment vessel (partial discharge of air containing radioactive materials) in order to fully secure safety.
1043
The control rod alarm is shut off and all rods are confirmed as being fully inserted.
1808
An increase in reactor containment vessel pressure is reported, apparently due to leakage of reactor coolant. However, we do not believe there is leakage of reactor coolant in the containment vessel at this moment.
Unit 2
1448
Unit 2 At Fukushima II is shut down automatically and reactor water level is stable. Offsite power is available.
Control rods are fully inserted (reactor is in subcritical status)
Status of main steam isolation valve: closed
Injection of water into the reactor had been done by the Reactor Core Isolation Cooling System, but at 4:50AM, injection by Make-up Water Condensate System begun.
There is no sign of leakage of reactor coolant in the containment vessel.
At 5:22AM, the temperature of the suppression chamber exceeded 100 degrees. As the reactor pressure suppression function was lost, at 5:22AM, it was determined that a specific incident stipulated in article 15, clause 1 has occurred.
We decided to prepare implementing measures to reduce the pressure of the reactor containment vessel (partial discharge of air containing radioactive materials) in order to fully secure safety. This preparation work commenced at around 10:33AM and completed at 10:58AM.
Unit 3
1448
Unit 3 At Fukushima II is shut down automatically and reactor water level is stable. Offsite power is available.
Control rods are fully inserted (reactor is in subcritical status)
Status of main steam isolation valve: closed
Reactor Core Isolation Cooling System is turned off. Currently, injection of water into the reactor is done by Make-up Water Condensate System.
There is no sign of leakage of reactor coolant in the containment vessel.
We decided to prepare implementing measures to reduce the pressure of the reactor containment vessel (partial discharge of air containing radioactive materials) in order to fully secure safety. This preparation work commenced at around 12:08PM and completed at 12:13AM.
At 12:15PM, the reactor achieved cold shut down.
Unit 4
1448
Unit 4 At Fukushima II is shut down automatically and reactor water level is stable. Offsite power is available.
Control rods are fully inserted (reactor is in subcritical status)
Status of main steam isolation valve: closed
Reactor Core Isolation Cooling System is turned off. Currently, injection of water into the reactor is done by Make-up Water Condensate System.
There is no sign of leakage of reactor coolant in the containment vessel.
In order to cool down the reactor, injection of water into the reactor had been done by the Reactor Core Isolation Cooling System,
0607 Saturday
the temperature of the suppression chamber exceeded 100 degrees. As the reactor pressure suppression function was lost, at 6:07AM, it was determined that a specific incident stipulated in article 15,clause 1 has occurred.
1144
It was decided to prepare implementing measures to reduce the pressure of the reactor containment vessel (partial discharge of air containing radioactive materials) in order to fully secure safety. This preparation work commenced at around 11:44AM and completed at 11:52AM.
