Misplaced Pages

BRRISON

Article snapshot taken from Wikipedia with creative commons attribution-sharealike license. Give it a read and then ask your questions in the chat. We can research this topic together.
2013 NASA project to study comet ISON
BRRISON
BRRISON prior to launch
Location(s)United States
Telescope styleballoon-borne telescope
optical telescope Edit this on Wikidata
  Related media on Commons
[edit on Wikidata]

The Balloon Rapid Response for ISON (BRRISON) was a NASA project involving a stratospheric balloon with science instruments intended to study comet C/2012 S1 (ISON) and other celestial objects.

Construction

The balloon featured an azimuth and attitude stabilized gondola carrying an 80-centimeter (31 in) telescope and two instruments on separate optical benches. The Johns Hopkins University Applied Physics Laboratory contributed the BRRISON Infrared Camera (BIRC) for detecting water and carbon dioxide at 2.5 to 5 μm. The Southwest Research Institute provided the Ultraviolet-Visible light camera (UVVis) with a fine steering mirror to detect hydroxyl (308 nm) and cyanogen (385 nm) emissions. To save time, both the telescope and gondola avionics were refurbished from JHU/APL's Stratospheric Terahertz Observatory mission. The BRRISON payload was intended to operate at 36,600 meters (120,000 ft) for up to 22 hours. The mission cost US$10.2 million, excluding the balloon and NASA personnel expenses, and progressed from concept to launch pad in ten months.

Mission

While Comet ISON was the primary target, this mission also planned to observe other objects, including comet 2P/Encke, Jupiter and its moons, the Mizar star system, Earth's Moon, and asteroids 10 Hygiea and 130 Elektra. Another goal was to measure Earth's atmospheric transmission and emission using BIRC and atmospheric turbulence using UVVis.

Launch

The balloon was launched from the Columbia Scientific Balloon Facility at Fort Sumner, New Mexico, on 28 September 2013 at 18:10 MDT (29 September 2013 at 00:10 UTC). However, about two and a half hours after launch, a communication interruption between hardware caused the telescope to return to its stowed position too rapidly, resulting in the stow bar being trapped. Team members worked to fix the problem, but the telescope was unable to be redeployed. The decision was made to keep the balloon afloat until it reached a safe location for mission termination, which occurred on 29 September at 06:04 MDT (12:04 UTC). The gondola and its payload was released under parachute and recovered near Spur, Texas, in "excellent condition". The hardware may be reused on future balloon missions.

References

  1. ^ Kremic & Cheng 2014, p. 5.
  2. Landis 2013, p. 15.
  3. ^ "BRRISON". NASA Planetary Data System Small Body Node. University of Maryland. 20 November 2014. Retrieved 6 March 2015.
  4. ^ Landis 2013, p. 11.
  5. ^ Pacheco, Luis Eduardo, ed. (2014). "BRRISON (Balloon Rapid Response for ISON)". StratoCat. Retrieved 6 March 2015.
  6. ^ "NASA's BRRISON Heads West to Prepare to Meet Comet ISON". Johns Hopkins University Applied Physics Laboratory. 6 September 2013. Archived from the original on 30 March 2015. Retrieved 6 March 2015.
  7. ^ Brown, Geoffrey (28 September 2013). "BRRISON Soars to Study Comet ISON" (Press release). Johns Hopkins University Applied Physics Laboratory. Retrieved 6 March 2015.
  8. Cheng et al. 2013, p. 11.
  9. ^ Eggers, Jeremy (29 September 2013). "BRRISON suffers science payload anomaly, unable to collect data". NASA. Retrieved 6 March 2015.
  10. Kremic & Cheng 2014, p. 10.
  11. Kremic & Cheng 2014, p. 11.
  12. Kremic & Cheng 2014, p. 12.

Bibliography

External links

Categories: