Misplaced Pages

Marman clamp

Article snapshot taken from Wikipedia with creative commons attribution-sharealike license. Give it a read and then ask your questions in the chat. We can research this topic together.
Typical Marman Clamp System

A Marman clamp is a type of heavy-duty band clamp; it allows two cylindrical objects to be clamped together end-to-end with a ring clamp. It is sometimes also known as a "Marman ring". It consists of a circular strap with an interior V-shaped groove. Tension is applied to the strap with a threaded bolt and nuts connecting to the ends of the strap. As the tension increases, the V-groove wedges over flanges on the circular parts to be assembled, providing the force that holds the ends of the two cylinders together. The Marman clamp is an alternative to a bolted flange connection which would be heavier and require more labor to connect. Another variety uses a flat strap, used where systems carry low pressure or to hold a cylindrical object in position.

Hose connectors

Aerospace pipe fittings with flanges for Marman clamps: a semi-rigid bleed air duct from a jet engine (left) and a semi-flexible fuel hose (right).

A common use for Marman clamps is as quick-disconnect connectors in flexible aircraft fuel lines.

Spacecraft separation

Marman clamps are used extensively in spaceflight systems and are common mechanical load-transfer and clamping mechanisms for connecting the upper stage and the satellite payload of space vehicles, for example, on the Cassini Plasma Spectrometer on the Cassini orbiter. They may also be used to join stages of a booster rocket.

Early separation systems using Marman clamps used explosive bolts for release. These have problems of unpredictability, the need to contain debris and difficulties in testing them. A more recent approach uses a screw thread. The tension of the clamp band itself is used to power the unscrewing of a central bolt, when released by a pyrotechnic pin puller triggered by a set of redundant NASA Standard Initiators (NSIs).

History

The Marman clamp was first produced by Herbert Marx, better known by his stage name Zeppo Marx; it was manufactured by his company, Marman Products from the 1930s.

At the time it was designed to secure cargo during transport. The U.S. Military used Marman clamps to transport the atomic bombs used at the end of the Second World War.

Marman clamps are found in many modern moving vehicles, though the screw band type clamp is becoming more popular.

See also

References

  1. http://www.saywell.co.uk/wp-content/uploads/2011/09/TF100-14D_MarmanClampProducts.pdf Marman V-Band Couplings, Flangs, Band Clamps and Strap Assemblies, retrieved Dec 31, 2019
  2. ^ D’Alto, Nick. "Oldies and Oddities: Zeppo's Gizmo". AIR & SPACE MAGAZINE. Retrieved 11 March 2014.
  3. ^ "Marman Clamp System Design Guidelines" (PDF). Guideline no. GD-ED-2214. NASA. Archived from the original (PDF) on 2013-02-16. Retrieved 2012-10-20.
  4. Shoghi, K.; Rao, H. V.; Barrans, Simon (2004). "Stress in V-section band clamps. Proceedings of the Institute of Mechanical Engineering Part C" (PDF). Journal of Mechanical Engineering Science. 3. 218: 251–261. doi:10.1243/095440604322900381. Retrieved 11 March 2014.
  5. Lazansky, Chuck (2012). "Refinement of a Low-Shock Separation System" (PDF). Proc. of the 41st Aerospace Mechanisms Symposium. Jet Propulsion Laboratory. p. 332. Retrieved 11 March 2014.
  6. Lazansky 2012, p. 333
  7. Chandler, Charlotte. Hello, I Must Be Going: Groucho And His Friends, page 182, ISBN 978-1-84739-104-9.
  8. Trevor Homer Born in the USA: The Book of American Origins,Skyhorse Publishing Inc., 2009 ISBN 1602397112 "Zeppo Marx"
  9. Donnelly, Jim (August 2009). "Why a Clamp?". Hemmings Classic Car.

External links

Categories: