Misplaced Pages

This article has multiple issues. Please help improve it or discuss these issues on the talk page. (Learn how and when to remove these messages) This article needs additional citations for verification. Please help improve this article by adding citations to reliable sources. Unsourced material may be challenged and removed. Find sources: "Transmission zeroes" – news · newspapers · books · scholar · JSTOR (September 2015) (Learn how and when to remove this message) This article may be too technical for most readers to understand. Please help improve it to make it understandable to non-experts, without removing the technical details. (November 2023) (Learn how and when to remove this message) (Learn how and when to remove this message)

Generally, in a two-port network, for a finite input, there exists an output. However, when zero output occurs for finite input, the network is said to have 'zero-transmission'. A transmission zero is a frequency at which the transfer function of a linear two-port network has zero transmission. Transmission zeroes at zero frequency and infinite frequency may be found in high-pass filters and low-pass filters respectively. Transmission zeroes at finite, non-zero frequency may be found in band-stop filters, elliptic filters, and type II Chebyshev filters. Transfer functions with both zero and infinite frequency can be found in band-pass filters. A transfer function may have multiple zeroes at the same frequency. A transfer function may have any number of transmission zeroes at zero frequency and infinite frequency, but transmission zeroes at finite non-zero frequency always come in conjugate pairs.

Combination of elements may prevent input from reaching the output by 'shortening' or 'opening' all transmission path by means of serial or parallel reasonance. For a more general overview, see: of zeros and poles.

Circuits with transmission zeroes

Generalized impedance converter

The circuit depicted to the left, based on a GIC (generalized impedance converter), has finite non-zero transmission zeroes.

State variable derived

The filter circuit to the right has the following transfer function:

${\displaystyle H(s)=-\left({\frac {R_{2}R_{8}}{R_{5}R_{6}}}\right){\frac {s^{2}R_{3}C_{1}R_{5}C_{2}+s+{\frac {R_{6}}{R_{7}}}}{s^{2}R_{3}C_{1}R_{2}C_{2}+s({\frac {R_{3}}{R_{1}}})R_{2}C_{2}+{\frac {R_{8}}{R_{7}}}}}}$

This circuit produces transmission zeroes at

${\displaystyle \omega _{0Z}=\left^{\frac {1}{2}}}$

when R₁/R₄ = R₇/R₆.

Passive two-port

A few procedures can be followed for realizing passive two-ports with transmission zeroes.

• As long as transmission zeros are located at the origin or infinity, all that is needed is the application of Cauer 1 or 2 steps to remove poles from either the admittance or the impedance at the origin or infinity. These removals can always be effected by long division.
• The order in which the poles are removed is arbitrary. Except for very simple networks or when all transmission zeros occur at the origin or infinity, generally there are several possible circuits that will realize a given ${\displaystyle Z_{21}(s)}$, depending on the order in which the poles are removed. The proportionality constants are generally different for different realizations.

Notes

1. ^ Temes, Gabor C.; LaPatra, Jack W. (1977). Circuit Synthesis and Design. McGraw-Hill. ISBN 0-07-063489-0.
2. Lindquist, Claude S. (1977). Active Network Design with Signal Filtering Applications (1st ed.). Steward and Sons. ISBN 0-917144-01-5.

This electronics-related article is a stub. You can help Misplaced Pages by expanding it.

• v
• t
• e

• Linear filters
• Electronics stubs